Fitting Video Games with Ticket
Dispenser
The Ticketflex
Maximizer allows you to fit a ticket dispenser to any arcade video game. The
ticket payout can be triggered by the coin/credit pulse.
1. Using a coin switch to
initiate ticket payout.
 |
| An
example of a coin switch operating opto isolated Game Drive Input of the
Ticketflex Maximizer. Pin
11 of JST 12 Connector is connected to +5V, the coin switch is connected
to pin 10 of JST 12. The table shows the Dip Switch and Jumper
adjustment for different types of Deltronic an Entropy ticket dispnser.
However the Ticketflex Maximizer can be adjusted to suit most types of
ticket dispensers.
Click
here for the Ticketflex Maximizer Connector Pinout.
|
| Dip
Switch & Jumper Adjustment |
| DISPENSER
TYPE |
SW
7 |
SW
8 |
JUMPER |
| Deltronic
1275 |
OFF |
OFF |
Dowm |
| Deltronic
DL4 |
OFF |
ON |
UP |
| Entropy
(Continuous) |
OFF |
OFF |
Down |
| Entropy
(Pulse) |
OFF |
ON |
UP |
|
NOTE:
1. GND is
connected to the black wire (pin 6 of JST 8) and the +12 V is connected to the
orange wire (pin 8 of JST 8) of the standard lead.
2. If opto isolation is
not required the coin switch can also be connected directly to pin 3 of the JST
8 connector (Game Drive Input).