HOME  TECHNICAL TIPS  PRODUCTS   SUPPORT   INQUIRIES  CONTACT US

No steering, accelerator - have you initialized the inputs?

Many driving games require input initialization when the potentiometers or the game board are replaced. This is a simple procedure during which the game board computer registers the initial values of the steering, accelerator and brake potentiometers. The computer stores these values in a memory where these data are retained even when the power is switched off. However on occasion the data in this memory can get corrupted and cause the malfunction of the steering, accelerator or brake. Check the operation manual of the particular game on how to enter "Input Initialization". In some games the initialization is entered by turning ON the test switch while the service button is held down. Then follow the instructions on the screen or in the operation manual.